1 / 1
Accuracy:
temperature range:
Options:
Model No. : | GTM |
---|---|
Warranty : | 12 Months |
Xian, Shaanxi, China
Mô tả Sản phẩm
Model | GTM |
Input signal | Thermal resistance(RTD):Pt100,Pt1000,Cu50 |
Thermocouple(TC):K,S,R,B,N,E,J,T | |
Temperature range | -270~+1820℃(set according to sensor measurement capability) |
Conversion accuracy | ≤0.2% or 0.2K |
Output signal | 4-20 mA(two-wire),HART |
Alarm | When the sensor fails (open circuit or short circuit), the output drops to ≤3.6mA or the output rises to ≥21.5mA |
Maximum load (Note 1) |
(V power- 9 V)/0.025A (output current) |
Limit current | ≤25mA |
Power supply voltage (Note 2) | 9...30VDC |
Response time | 1S |
Lightning protection (Note 3) | ±4000V(≤5 times) |
Anti-pulse group (Note 4) |
±4000V |
Anti-radio frequency interference | >10V/m(80MHz~1000MHz) |
Ambient temperature | -40~85℃ |
Temperature drift | 0.008%FS/1℃ |
Long-term stability | ≤0.1℃/year or 0.05%/year |
Ghi chú:
1: Với giao thức HART, tải tối đa là: (V điện- 12 V) /0.025A (dòng ra). Khi đường ray được lắp đặt, tải tối đa là: (V điện- 10 V) /0.025A (dòng ra).
2: Với giao thức HART, nguồn cung cấp là 12 ... 30VDC. Khi thanh ray được lắp đặt, nguồn điện là 10 ... 30VDC.
3: Với giao thức HART, không có bảo vệ chống sét.
4: Với giao thức HART hoặc cài đặt đường sắt, nhóm chống xung: ± 3 000V.
Model | Code | Note |
GTM | Smart temperature transmitter | |
Input signal(note 1) | A | Pt100 |
RT | Pt1000 | |
RC | Cu50 | |
K | K-type thermocouple | |
S | S-type thermocouple | |
R | R-type thermocouple | |
B | B-type thermocouple | |
N | N-type thermocouple | |
E | E-type thermocouple | |
J | J-type thermocouple | |
T | T-type thermocouple | |
Output signal | A | 4-20 mA(two-wire) |
H(note 2) | HART(two-wire 4-20mA) | |
Configuration method | A | Slide switch |
P | Slide switch+PC programming | |
Range | A(note 3) | Factory default settings |
X | User specified code (limited to 15 ranges) | |
Installation | A | Top installation (screw fixation) |
D | Rail installation (35mm DIN rail) | |
Annex | A | Standard |
B | With calibration report |
Ghi chú:
1: Khi chọn nhiều tín hiệu đầu vào (tức là đầu vào đa năng), nên trang bị một bộ lập trình PC để thiết lập phạm vi.
2: Giao thức HART chỉ áp dụng cho các sản phẩm gắn trên.
3: Phạm vi cần xác nhận phạm vi nhiệt độ cụ thể để có thể cài đặt tại nhà máy.
ĐẶT HÀNG NHƯ THẾ NÀO? LIÊN HỆ NGAY VỚI CHÚNG TÔI NHƯ BÊN DƯỚI⇓
Xian, Shaanxi, China
Gửi yêu cầu của bạn cho nhà cung cấp này