1 / 1
Brand Name : | maxmach |
---|
Hangzhou, Zhejiang, China
Mô tả Sản phẩm
Máy cán tôn sàn này là thiết bị đặc biệt để cán liên tục và tạo hình lạnh trên tấm thép.
Máy cán sàn thông qua cuộn thép tấm như nguyên liệu, suy giảm, sau đó liên tục cán và lạnh
hình thành, tự động cắt theo kích cỡ và xuất bảng điều khiển đã hoàn thành cho người ủng hộ.
Máy cán sàn sàn thông qua điều khiển PLC, tần số AC và công nghệ điều chỉnh tốc độ, và nó nhận ra việc sản xuất tự động liên tục,
do đó, nó thực sự là một loại thiết bị tiết kiệm năng lượng và sản xuất hiệu quả cao cho kết cấu thép.
Thông số kỹ thuật cho máy cán sàn sàn
Item |
Para |
Memo |
|
Suitable material |
Type |
galvanized steel, colored steel |
|
Thickness (mm) |
0.75-1.25 |
|
|
Yield Strength (Mpa) |
230 |
|
|
Width (mm) |
1220 |
|
|
Forming Speed (m/min) |
About 15 |
Not including cutting time |
|
Roller quantity |
About 30 stands |
Depend on actual design |
|
Forming main motor power(KW) |
5.5kw*3 |
Depend on actual design |
|
Main hydraulic station power(KW) |
5.5 |
Depend on actual design |
|
Decoiler motor power (KW) |
5.5 |
Depend on actual design |
|
Decoiler hydraulic station power (KW) |
3 |
Depend on actual design |
|
Total power |
30.5 |
Depend on actual design |
|
Power |
AC440V,60Hz,3 Phase |
|
|
Dimension (L×W×H, m) |
27×3×2 |
Depend on actual design |
|
|
|
|
Name |
Model/Name |
Quantity |
Technical Description |
1.Decoiler system |
6T automatic decoiler (JK6-1250AM) |
1set |
Arm type, hydraulic expand, electrical motor decoil, supersonic control, with coil car. |
2. Main forming system |
Feeding guide device |
1set |
1. Roller material:38CrMoAl with surface nitrified 2. Roller shaft material: 45# steel after quenching and tempering treatment 3. Roller inner supporting structure type: column 4. Motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 5. Cutting blade material Cr12 quenched treatment |
Roll forming system |
1set |
||
Post-cutting device |
1set |
||
3. Output system |
Stacking system |
1set |
1.Stacker length is 6m. 2.This system`s air source has to be prepared by customer, air pressure be higher than 0.5MPa; air flow be more than 0.5 cubic meter per minute; and air source shall be dry and clean. |
4. Hydraulic system |
1set |
Main machine using outside-placed hydraulic station. Decoiler using inside-placed hydraulic station. |
|
5. Electric control system |
1set |
1. PLC Control, encoder automatic cutting in length 2. Operation mode: Touch screen+ button 3. adjusting the speed by AC frequency conversion |
Quá trình làm việc cho sàn cuộn máy ép
Decoiling → Cho ăn có hướng dẫn → Cuộn hình thành → Cắt theo chiều dài → xếp thành bảng điều khiển
Đóng gói và vận chuyển về sàn sàn cuộn tạo thành máy
Tìm hiểu thêm về nhóm MAXMACH của chúng tôi
Hangzhou, Zhejiang, China
Gửi yêu cầu của bạn cho nhà cung cấp này