1 / 4
Model No. : | YJSAY |
---|---|
Brand Name : | HUAYUAN YONGTONG |
Brand : | HUAYUAN YONGTONG |
Beijing, Beijing, China
Mô tả Sản phẩm
Đặc điểm kỹ thuật được liệt kê này bao gồm thông tin cấu trúc, hiệu suất, kiểm tra và đóng gói của Cáp điện EHV do Công ty TNHH Cáp Huayuan Gaoke Bắc Kinh sản xuất.
Các vấn đề không được đề cập trong tiêu chuẩn kỹ thuật này sẽ do người mua và nhà cung cấp thương lượng. Tài liệu này xác nhận thỏa thuận của hai bên là hợp đồng kỹ thuật của hợp đồng trừ khi có quy định khác trong phụ lục chính thức bằng văn bản.
Dây cáp mà TBEA cung cấp phải được thiết kế, sản xuất và thử nghiệm theo các tiêu chuẩn quốc tế như sau:
Quality Control Standard |
|
ISO 9001 |
Quality Management Systems |
ISO 14001 |
Environmental Management Systems |
Component Material Standard |
|
IEC 60228 |
Conductors of insulated cables |
Cable Standard |
|
IEC 62067 |
Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements |
CU / XLPE / CWS / AL-PE / HDPE / 220 / 400kV 1 × 2000 / 240mm2
Structure |
Nominal thickness mm |
Nominal diameter mm |
1 Copper conductor(5 Segmental) |
/ |
54.7±1.0 |
2 semi-conductive tape |
0.14 |
55.7 |
3 conductor screen(wrapping & extruding) |
2.5 |
59.7 |
4 XLPE insulation |
28.0 |
115.7±1.5 |
5 Insulation screen |
1.0 |
118.7 |
6 semi-conductive water blocking tape |
2.0 |
120.7 |
7 Copper wire screen with Copper tape wrapping(gap) |
Sectional area 240. mm2(calculation value) |
125.2 |
8 semi-conductive water blocking tape |
0.6 |
126.2 |
11 Aluminum-polyethylene tape |
0.21 |
126.9 |
12 HDPE outer sheath |
6.0 |
138.9 |
13 semi-conductive layer(graphite coating) |
|
138.9±3.0 |
No |
DESCRIPTION |
UNIT |
VALUEREQUIRED |
1 |
Manufacturer |
|
Beijing Huayuan Gaoke Cable Co.,Ltd. |
2 |
Cable size |
mm2 |
2000(nominal) |
3 |
Cable type |
|
CU/XLPE/CWS/AL-PE/HDPE |
4 |
Voltage Grade(U0/U(Um) |
KV |
220/400(420) |
5 |
Reference Standard |
|
IEC 62067 |
6 |
No. and cross sectional area of conductor |
|
1C 2000sqmm |
7 |
Conductor material |
|
Copper |
8 |
Shape |
|
5 Segmental |
9 |
Nominal diameter of conductor |
mm |
54.7 |
10 |
Conductor Screen materials |
|
Simi-conduction tape + Extruded semi-conducting compound |
11 |
Nominal thickness of conductor screen |
mm |
2.5(wrapping +extruding) |
12 |
Insulation material |
|
super clean XLPE |
13 |
Nominal thickness of insulation |
mm |
28.0 |
14 |
Nominal diameter over insulation |
mm |
115.7 |
15 |
Insulation screen material |
|
Extruded semi-conducting compound |
16 |
Nominal thickness of insulation screen |
mm |
1.0 |
17 |
Metallic Screen material |
|
Copper wire screen with copper spiral binder tape (gap) |
18 |
Short circuit current rating(t=1.0sec) |
|
|
|
Of conductor |
kA |
287.4 |
|
Of metallic screen |
kA |
34.2 |
19 |
Outer sheath material |
|
HDPE |
20 |
Nominal thickness of outer sheath |
mm |
6.0 |
21 |
Nominal overall diameter of cable |
mm |
138.9 |
22 |
Approx. weight of cable |
kg/km |
30920 |
23 |
Minimum bending radius |
mm |
2780 |
24 |
Max.D.C. Conductor resistance at20`C |
Ω/km |
0.009 |
25 |
Nominal capacitance per phase |
uF/km |
0.202 |
26 |
Max. current rating in air at 40° C |
A |
2045(2 circuit ,phase spacing 300, flat formation, a point earthed or cross connected) |
27 |
Max. current rating in ground at 25° C |
A |
1507(2circuit ,phase spacing 300, flat formation, a point earthed or cross connected ,depth of laying 1000 mm ,thermal resistivity of soil 1.2 k.m/W) |
28 |
Max. conductor temperature on continuous |
℃ |
90 |
29 |
Max. conductor temperature in short circuit |
℃ |
250(not exceed 5s) |
Việc kiểm tra cáp phải được thực hiện theo tiêu chuẩn áp dụng của Cáp điện 400 kV. Các mục thử nghiệm sau đây phải được thực hiện theo các tiêu chuẩn IEC có liên quan.
No. |
Test item |
Routine tests |
|
1 |
Partial discharge test |
2 |
Voltage test |
3 |
electrical test on oversheath of the cable |
Sample tests |
|
1 |
conductor examination |
2 |
measurement of electrical resistance of conductor and of metal screen/sheath |
3 |
measurement of thickness of insulation and oversheath |
4 |
measurement of thickness of metal sheath |
5 |
measurement of diameters |
6 |
hot set test for XLPE insulation |
7 |
measurement of capacitance |
Các dây cáp phải được làm bằng thép trống. Đánh dấu không thể xóa được sẽ được in trên bề mặt của mặt bích trống phù hợp với yêu cầu của khách hàng.
1. cáp điện cao áp 2. cáp Xlpe 3. cáp mặt đất 4. dây cáp điện 5. cáp cấu trúc
Beijing, Beijing, China
Gửi yêu cầu của bạn cho nhà cung cấp này